Drill pipe spec
2⅞" E-75 Drill Pipe
10.4 lb/ft · E-75 · NC31 (2⅞ IF)
2⅞" E-75 drill pipe is a 10.4 lb/ft API 5DP tubular with a 0.362" wall and NC31 (2⅞ IF) tool joints, offering a theoretical tube-body tensile yield of about 214,344 lb and torsional yield near 11,554 ft-lb. Available for rental worldwide, inspected and serialized.
Dimensional data
| Nominal OD | 2.875 in (73 mm) |
|---|---|
| Nominal weight | 10.4 lb/ft |
| Wall thickness | 0.362 in |
| Inside diameter (ID) | 2.151 in (54.6 mm) |
| Grade | E-75 (min yield 75,000 psi) |
| Tool joint | NC31 (2⅞ IF) |
| Range | Range 2 |
Tube-body performance
| Cross-sectional area | 2.858 in² |
|---|---|
| Tube-body tensile yield | 214,344 lb |
| Tube-body torsional yield | 11,554 ft-lb |
| Internal capacity | 0.0045 bbl/ft |
| Steel displacement | 0.0028 bbl/ft |
Performance figures are theoretical tube-body values computed from nominal geometry and minimum
yield strength. Actual ratings depend on wear class, connection and service conditions.
Other grades in 2⅞"
FAQ
2⅞" E-75 drill pipe
What is the tensile yield of 2⅞" E-75 drill pipe?
The theoretical tube-body tensile yield of 2⅞" 10.4 lb/ft E-75 drill pipe is approximately 214,344 lb, based on a cross-sectional area of 2.858 in² and a minimum yield strength of 75,000 psi. Verify against API RP 7G-2 and mill certificates for your string.
What connection does 2⅞" E-75 drill pipe use?
Our rental 2⅞" E-75 drill pipe is typically supplied with NC31 (2⅞ IF) tool joints, though premium connections can be provided on request.
Can I rent 2⅞" E-75 drill pipe?
Yes. Drillstrings rents inspected, serialized 2⅞" E-75 drill pipe worldwide. Send your footage, connection and rig location for a quote within the hour.